How To Set Ring Alarm Code

Keypad 2nd Generation
Z-Wave™ Technical Transmission

Ring Keypad

Introduction

Ring Alert Keypad is a wireless accessory for the Band Warning system which provides users the ability to arm and disarm their system, view system status, and manage warning conditions. After installing the Keypad and setting upwardly the Keypad in the Ring app, perform arming and disarming deportment too as receive system indications for different status updates and events. The Band Alarm Base of operations Station is required to enable Keypad features and functions within the Ring app.

Notes:

1. This production tin be operated in any Z-Wave™ network with other Z-Wave certified devices from other manufacturers. All mains operated nodes within the network will act as repeaters regardless of vendor to increase reliability of the network.
2. SmartStart enabled products can be added into a Z-Wave network by scanning the ZWave QR Lawmaking present on the production with a controller providing SmartStart inclusion. No further action is required and the SmartStart product will be added automatically within x minutes of being switched on in the network vicinity.

Installation & Set-Up

Ring Alarm Keypad – Basic Setup & Installation
In-app Setup

1. Ensure your Ring Alarm arrangement is disarmed.
2. In the Band app, tap Gear up a Device and observe the Keypad in the Security Devices menu.
3. Follow the in-app instructions to complete setup. Plug in the Keypad to trigger setup style.

Installation

1. Choose a location for installing the Keypad.
2. Utilise the provided bracket and identify the Keypad on a flat surface. For wall mounting, use the screws and anchors to secure the bracket to the wall and slide the Keypad into identify.
3. Using the provided double-sided record, pare the backing and attach the Motion Detector to the mounting location.

Notation
This product can exist operated in whatsoever Z-Moving ridge network with other Z-Moving ridge certified devices from other manufacturers. All mains operated nodes inside the network will act every bit repeaters regardless of vendor to increase reliability of the network.
This is a SmartStart enabled product which can exist added into a Z-Wave network by scanning the Z-Wave QR Code present on the product with a controller providing SmartStart inclusion. No farther action is required and the SmartStart product will be added automatically within 10 minutes of existence switched on in the network vicinity. This production can also be operated in any Z-Moving ridge network with other Z-Wave certified devices from other manufacturers.

Z-Wave Instructions

Z-Wave Device Type: Entry Control Keypad
Role Type: Listening Sleeping Slave
GENERIC_TYPE_ENTRY_CONTROL (0x40)
SPECIFIC_TYPE_SECURE_KEYPAD (0x0B)

Ring Alert Keypad – Inclusion

Adding Band Alarm Keypad to a Z-Wave Network

Ring Alert Keypad tin can be added via SmartStart or Classic inclusion fashion.
Note
When prompted for the QR Code or PIN, you may discover them on the device, on the box, or on a carte du jour within the box. Go on the device nearby. You'll exist prompted plug the device in to power on the device and enter setup mode.

SmartStart Inclusion Steps:

1. Initiate the add together flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Band mobile application.
2. When prompted by the mobile application, scan the QR code found on the package of the Keypad. The QR lawmaking can too be establish on the device itself.
3. Using the power adapter and cable provided, plug the Keypad into a standard outlet and the device will get into SmartStart inclusion mode. While in this way, Keypad can be added to a Z-Wave controller that supports SmartStart. When in SmartStart inclusion mode, SmartStart tin exist restarted by tapping the button on the front of the device.

Classic Inclusion Steps:
Classic Inclusion should be used if the controller does not support SmartStart.

1. Initiate add flow for Security Devices in the Ring mobile application – Follow the guided add flow instructions provided in the Band mobile application.
2. Select add manually and enter the 5-digit DSK PIN constitute on the package of the Ring Alarm Keypad or the 5-digit DSK Pivot constitute under the QR code on the device. After powering on the device, printing and hold the #1 button for ~3 seconds. Release the push button and the device will enter Classic inclusion manner which implements both classic inclusion with a Node Data Frame, and Network Broad Inclusion. During Classic Inclusion way, the dark-green Connectedness LED will blink three times followed by a brief intermission, repeatedly. When Classic inclusion times-out, the device will glimmer alternating ruby and dark-green a few times.

LED Behabior for Inclusion	Glimmer Blueprint
SmartStart Started	Dark-green LED three times, repeated after a brief pause
Archetype Inclusion Started	Light-green LED 3 times, repeated after a brief pause
Classic Inclusion Timed-Out	Alternating scarlet and green a few times
Inclusion Successful (Authenticated S2)	Green LED on solid
Inclusion Not Successful (Cocky-Destruct)	Cerise LED on solid

Ring Alarm Keypad – Exclusion

Removing Ring Alarm Keypad from a Z-Wave Network
Exclusion Instructions:

1. Initiate remove "Ring Alarm Keypad" flow in the Ring Alarm mobile application – Select the settings icon from device details page and choose "Remove Device" to remove the device. This will place the controller into Remove or "Z-Wave Exclusion" mode.
2. Locate the pinhole reset button on the back of the device.
3. With the controller in Remove (Z-Wave Exclusion) style, utilise a paper clip or similar object and tap the pinhole button. The device'southward Connectedness LED turns on solid red to indicate the device was removed from the network.

Band Alarm Keypad – Manufactory Reset

Factory Default Instructions

1. To restore Ring Alert Keypad to factory default settings, locate the pinhole reset push button on the device. This is found on the back of the device later removing the back bracket.
2. Using a paperclip or like object, insert it into the pinhole, press and hold the button downwards for ten seconds.
3. The device's Connexion icon LED volition rapidly glimmer green continuously for 10 seconds. Later on about x seconds, when the green blinking stops, release the push. The cherry LED will plow on solid to point the device was removed from the network.

Note
Utilize this process merely in the outcome that the network primary controller is missing or otherwise inoperable.

Wake-Up Notification
Non applicable. Ring Warning Keypad (LSS) is a Ofttimes Listening Receiver Slave (FLiRS) device and does not support Wake Up Control Grade.

Z-Moving ridge Command Classes

Command Course	Version	Required Security Class
Association	2	Highest granted
Association Group Information	three	Highest granted
Device Reset Locally	ane	Highest granted
Firmware Update Meta Data	5	Highest granted
Indicator	three	Highest granted
Manufacturer Specific	ii	Highest granted
Multi-Channel Clan	3	Highest granted
Powerlevel	1	Highest granted
Security 2	ane	none
Security 0	ane	none
Supervision	ane	none
Transport Service	2	none
Version	3	Highest granted
Z-Wave Plus Info	two	none
Notification	8	Highest granted
Configuration	4	Highest granted
Battery	2	Highest granted
Entry Control	1	Highest granted

Association Command Form

Group Identifier	Max Nodes	Description
one (Lifeline)	0x05	ane. Notification Study a. Encounter notification CC section for notifications that are sent 2. Entry Control Notification 3. Battery Report 4. Device Reset Locally Notification

Configuration Command Class

The Keypad has the following supported configuration parameters.

Parameter Number	Description	Number of Bytes	Default	Min	Max	Format
one	Heartbeats: This parameter is the number minutes between heartbeats. Heartbeats are automatic battery reports on a timer later on the terminal event.	1	70 (0x46)	1 (0x01)	70 (0x46)	one
2	Number of application level retries attempted for messages either non ACKed or letters encapsulated via supervision become that did not receive a report.	one	1 (0x01)	0 (0x00)	5 (0x05)	2
3	Application Level Retry Base of operations Wait Fourth dimension Period: The number base seconds used in the calculation for sleeping betwixt retry messages.	1	5 (0x05)	1 (0x01)	60 (0x3C)	three
iv	Announcement Audio Book (for audio files – should this be lumped into one of the other book settings?)	1	vii	0	210	4
five	Primal Tone Volume	ane	6	0	10	5
6	Siren Volume	i	10	0	x	6
seven	Long printing emergency duration (seconds) This parameter allows a user to configure the elapsing in seconds for the hold fourth dimension required to capture a long press . This includes Emergency Buttons + Manner Buttons (Police, Fire, Medical, Disarmed, Dwelling house, Abroad)	i	iii	2	v	seven
viii	Long press number pad elapsing (seconds) This parameter allows a user to configure the duration in seconds for the agree time required to capture a long press . This includes Number Pad + Bank check & X (0-9, Check, X)	1	3	2	5	8
9	Proximity Display Timeout : Timeout in seconds when proximity is detected and no input is received	ane	5	0	30	nine
10	Button Printing Display Timeout : Timeout in seconds when any button is pressed, but a sequence is not completed and buttons are no longer beingness pressed	1	5	0	30	10
11	Status Alter Display Timeout: Timeout in seconds when indicator command is received from the hub to change status	ane	five	0	30	11
12	Security Way Brightness: Adjusts the brightness of the security mode buttons	1	100	0	100	12
13	Key Backlight Effulgence: Adjusts the brightness of the keypad backlight. Used for Key Backlight LEDs but Available settings: 0-100%	i	100	0	100	13
14	Ambient Light Sensor Level: Low-cal threshold where keypad will finish backlighting if higher than	1	five	0	100	14
15	Proximity On/OFF: Turn On and Off the Proximity Detection.	1	1	0	1	fifteen
16	Ramp Time Config: Ramp time in milliseconds to turn the LEDs on/off. Applies to all LEDs on the keypad	1	l	0	255	16
17	Low Battery Threshold – The per centum level at which the display would turn on the xanthous battery indicator (whenever the brandish is on).	1	xv	0	100	17
xviii	Languages Gear up: scrap number in the languages supported bitmask to set	ane	three 0 (U.s. English)	0	31	18
19	Warn Bombardment Threshold – The percentage level at which the display would turn on the ruby-red battery indicator (whenever the display is on).	one	5	0	100	19
xx	The number of milliseconds waiting for a Supervisory Report response to a Supervisory Get encapsulated command from the device earlier attempting a retry.	2	1500 (0x5DC)	500 (0x1F4)	5000 (0x1388)	20
21	System Security Mode Display: (Always, Sometimes, Never). • 601 = Always On • 1 – 600 = periodic interval • 0 = Always	2	0	0	601	21
22	Languages Supported (Become): returns bitmask of languages supported. Bits set up to 1 indicate that the language is supported	4	N/A	N/A	Due north/A	22

Notification Command Class, V8

Sensor Condition	Command Form and Value	Clan Group
AC mains ability reconnected	Notification Report Blazon: 0x08 Power Direction State: 0x03 AC mains reconnected	1 (Lifeline)
AC mains ability disconnected	Notification Report Type: 0x08 Power Management State: 0x02 Air conditioning mains disconnected	1 (Lifeline)
Watchdog Notification	Notification Written report Type: System 0x09 Country Value: 0x04 System Software Failure Land Parameter Value = Ox55	1 (Lifeline)
Software Error (Band)	Notification Study Type: Organization 0x09 State Value: 0x04 Organization Software Failure State Parameter Value = OxAA (Band Value for Soft Error)	1 (Lifeline)
Software Fault (SDK)	Notification Study Type: Organization 0x09 State Value: 0x04 System Software Failure Country Parameter Value = OxA9 (SDK Value for Soft Fault)	1 (Lifeline)
Software Reset (Non triggered by failure)	Notification Report Blazon: Organization 0x09 State Value: 0x04 System Software Failure State Parameter Value = OxAC	1 (Lifeline)
Power On Reset	Notification Report Type: Ox08 Ability Management Consequence Parameter: Ox01 Power has been practical	i (Lifeline)
Brownout	Notification Report Type: 0x08 Power Direction Event: 0x05 Voltage Drop/Drift	1 (Lifeline)
Pivot Reset (soft reset)	Notification Report Type: System 0x09 State Value: 0x04 Arrangement Software Failure State Parameter Value = OxAB	one (Lifeline)
Dropped Frame	Yes, via Notification Set of Notification Type 0x07, and condition of 0x00: This blazon of notification turned off 0xFF: This type of notification turned on	1 (Lifeline)

Supplier'due south Declaration of Conformity – Compliance Data Argument

Unique Identifier: Ring Contact Sensor
Responsible Political party and Party issuing Supplier'southward Declaration of Conformity
Band LLC dba Ring
1523 26th Street
Santa Monica, CA 90404 United states of americaA.
www.ring.com / [email protected]
FCC Compliance Statement (for products subject to Part 15)

This device complies with Part 15 of the FCC Rules. Functioning is subject to the following two conditions: (1) This device may non cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired functioning.

Notation: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and tin radiate radio frequency energy and, if non installed and used in accord with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference volition non occur in a detail installation. If this equipment does cause harmful interference to radio or television reception, which tin be adamant by turning the equipment off and on, the user is encouraged to try to correct the interference by 1 or more of the post-obit measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is continued.
• Consult the dealer or an experienced radio/Tv technician for aid.

Innovation, Science and Economic Development Canada (ISED) Compliance
This device contains licence-exempt transmitter(s)/ receiver(s) that comply with Innovation, Scientific discipline and Economic Evolution Canada'southward licence-exempt RSS(s). Operation is subject to the following ii atmospheric condition:

1. This device may not crusade interference.
2. This device must accept any interference, including interference that may cause undesired operation of the device.

CAN ICES-3 (B)/NMB-3(B)
In accordance with FCC requirements of homo exposure to radio frequency fields, the radiating element shall be installed such that a minimum separation distance of 20 cm is maintained from the full general population.

Alarm: Changes or modifications to this unit not expressly canonical by the party responsible for compliance could void the user's say-so to operate the equipment.
CAUTION: To reduce the risk of electric stupor, DO NOT open the unit. There are no user serviceable parts within the unit. Refer to customer support for any repairs.

CAUTION: Danger of explosion if battery is incorrectly replaced. Replace but with the aforementioned or equivalent type recommended by the manufacturer. Dispose of the used batteries according to the manufacturer's instructions.

To review your warranty coverage, please visit www.ring.com/warranty.
© 2022 Band LLC or its affiliates.
Band, E'er Home, and all related logos are trademarks of Ring LLC or its affiliates.

Documents / Resources

Source: https://manuals.plus/ring/ring-alarm-keypad-manual

Share this post